Speedtech Nova Subframe Manuel d'utilisateur télécharger pdf (Page 10)

10 | P a g e

8. Install the Upper Control Arm (UCA) bolts into the slotted mounting holes. The

arm's stainless cross shaft mounts on the inside of the control arm mount

bracket, and the short straight tube on the arm should be towards the rear. These

holes in the frame are slotted to allow adjustment of the suspension's camber

curve. We recommend starting initially with the arms all the way up in the slot.

Tighten these bolts as needed and the alignment shop will torque them to specs.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Pas de commentaire

Speedtech Nova Subframe Manuel d'utilisateur Page 10