Speedtech Nova Subframe Manuel d'utilisateur télécharger pdf (Page 7)

7 | P a g e

The lock nuts that are provided with the lower control arms must be installed

through the hole in the bottom of the sub frame, a small amount of red Loctite is

suggested. At this time you can torque all 4 lower control arm nuts to 70 ft/ lbs.

It is recommended you grease the LCA bushings via the grease fittings at this

time. We suggest using Permatex Ultra Slick Synthetic Grease but any high

quality chassis grease will do.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

Speedtech Nova Subframe Manuel d'utilisateur Page 7